Inside Our 8-Step Mass Production Process

Every approved sample at Ruihan Industrial is followed by a consistent, repeatable production workflow. Here is what happens after you greenlight the paint master.

Step 1 — Mold Making

Steel or aluminum tooling is cut on CNC machines, then polished and tested with short-shot trials.

Step 2 — Blank Figure

Injection or rotocast machines produce raw bodies. Each cavity is numbered so we can trace defects back to source tooling.

Step 3 — Dustless Painting

A filtered spray booth eliminates airborne particles before Pantone-matched coats are applied.

Step 4 — Pad Printing

Eyes, logos and fine details are transferred with silicone pads. Registration is checked every 50 units.

Step 5 — Assembly

Multi-part SKUs are assembled station-by-station with torque-tested joints where required.

Step 6 — Quality Control

A 15-person QC team runs AQL 2.5 inspection. SGS pre-shipment audits are offered on request.

Step 7 — Packing

Blister, window box, gift box or poly bag — packaging is engineered alongside the figure, not bolted on at the end.

Step 8 — Shipped

FOB, CIF or DDP. Air, sea or rail. Our forwarder network reaches 60+ countries.